1993 Fiat Panda vs. 1972 Mercedes-Benz 230.4
To start off, 1993 Fiat Panda is newer by 21 year(s). Which means there will be less support and parts availability for 1972 Mercedes-Benz 230.4. In addition, the cost of maintenance, including insurance, on 1972 Mercedes-Benz 230.4 would be higher. At 2,307 cc (4 cylinders), 1972 Mercedes-Benz 230.4 is equipped with a bigger engine. In terms of performance, 1972 Mercedes-Benz 230.4 (108 HP) has 74 more horse power than 1993 Fiat Panda. (34 HP) In normal driving conditions, 1972 Mercedes-Benz 230.4 should accelerate faster than 1993 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1972 Mercedes-Benz 230.4 weights approximately 670 kg more than 1993 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1972 Mercedes-Benz 230.4 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Mercedes-Benz 230.4. However, in wet, icy, snow, or gravel driving conditions, 1993 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Mercedes-Benz 230.4 (186 Nm @ 2500 RPM) has 128 more torque (in Nm) than 1993 Fiat Panda. (58 Nm @ 3000 RPM). This means 1972 Mercedes-Benz 230.4 will have an easier job in driving up hills or pulling heavy equipment than 1993 Fiat Panda. 1972 Mercedes-Benz 230.4 has automatic transmission and 1993 Fiat Panda has manual transmission. 1993 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1972 Mercedes-Benz 230.4 will be easier to drive especially in heavy traffic.
Compare all specifications:
1993 Fiat Panda | 1972 Mercedes-Benz 230.4 | |
Make | Fiat | Mercedes-Benz |
Model | Panda | 230.4 |
Year Released | 1993 | 1972 |
Engine Position | Front | Front |
Engine Size | 767 cc | 2307 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 34 HP | 108 HP |
Torque | 58 Nm | 186 Nm |
Torque RPM | 3000 RPM | 2500 RPM |
Engine Bore Size | 65 mm | 93.7 mm |
Engine Stroke Size | 58 mm | 83.6 mm |
Engine Compression Ratio | 9.2:1 | 9.0:1 |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 3 doors | 4 doors |
Vehicle Weight | 680 kg | 1350 kg |
Vehicle Length | 3420 mm | 4690 mm |
Vehicle Width | 1500 mm | 1780 mm |
Vehicle Height | 1440 mm | 1450 mm |
Wheelbase Size | 2170 mm | 2760 mm |
Fuel Tank Capacity | 50 L | 65 L |