1993 Fiat Uno vs. 1946 Jeep CJ2A
To start off, 1993 Fiat Uno is newer by 47 year(s). Which means there will be less support and parts availability for 1946 Jeep CJ2A. In addition, the cost of maintenance, including insurance, on 1946 Jeep CJ2A would be higher. At 2,199 cc (4 cylinders), 1946 Jeep CJ2A is equipped with a bigger engine. In terms of performance, both vehicles can yield 59 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1946 Jeep CJ2A weights approximately 350 kg more than 1993 Fiat Uno.
Because 1946 Jeep CJ2A is four wheel drive (4WD), it will have significant more traction and grip than 1993 Fiat Uno. In wet, icy, snow, or gravel driving conditions, 1946 Jeep CJ2A will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1946 Jeep CJ2A (145 Nm @ 3600 RPM) has 56 more torque (in Nm) than 1993 Fiat Uno. (89 Nm @ 3000 RPM). This means 1946 Jeep CJ2A will have an easier job in driving up hills or pulling heavy equipment than 1993 Fiat Uno.
Compare all specifications:
1993 Fiat Uno | 1946 Jeep CJ2A | |
Make | Fiat | Jeep |
Model | Uno | CJ2A |
Year Released | 1993 | 1946 |
Body Type | Hatchback | SUV |
Engine Position | Front | Front |
Engine Size | 1116 cc | 2199 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 59 HP | 59 HP |
Engine RPM | 5700 RPM | 3600 RPM |
Torque | 89 Nm | 145 Nm |
Torque RPM | 3000 RPM | 3600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 760 kg | 1110 kg |
Vehicle Length | 3690 mm | 3130 mm |
Vehicle Width | 1570 mm | 1460 mm |
Vehicle Height | 1430 mm | 1630 mm |
Wheelbase Size | 2370 mm | 2040 mm |