1993 Ford Contour vs. 1956 Moretti 1200
To start off, 1993 Ford Contour is newer by 37 year(s). Which means there will be less support and parts availability for 1956 Moretti 1200. In addition, the cost of maintenance, including insurance, on 1956 Moretti 1200 would be higher. At 2,544 cc (6 cylinders), 1993 Ford Contour is equipped with a bigger engine. In terms of performance, 1993 Ford Contour (168 HP @ 6250 RPM) has 100 more horse power than 1956 Moretti 1200. (68 HP @ 7000 RPM). In normal driving conditions, 1993 Ford Contour should accelerate faster than 1956 Moretti 1200. With that said, vehicle weight also plays an important factor in acceleration. 1993 Ford Contour weights approximately 738 kg more than 1956 Moretti 1200. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Moretti 1200 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Moretti 1200. However, in wet, icy, snow, or gravel driving conditions, 1993 Ford Contour, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1993 Ford Contour | 1956 Moretti 1200 | |
Make | Ford | Moretti |
Model | Contour | 1200 |
Year Released | 1993 | 1956 |
Engine Position | Front | Front |
Engine Size | 2544 cc | 1204 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 168 HP | 68 HP |
Engine RPM | 6250 RPM | 7000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1313 kg | 575 kg |
Vehicle Length | 4680 mm | 3810 mm |
Vehicle Width | 1760 mm | 1510 mm |
Vehicle Height | 1400 mm | 1430 mm |
Wheelbase Size | 2710 mm | 2360 mm |