1993 Ford Contour vs. 2001 Peugeot 307
To start off, 2001 Peugeot 307 is newer by 8 year(s). Which means there will be less support and parts availability for 1993 Ford Contour. In addition, the cost of maintenance, including insurance, on 1993 Ford Contour would be higher. At 2,544 cc (6 cylinders), 1993 Ford Contour is equipped with a bigger engine. In terms of performance, 1993 Ford Contour (168 HP @ 6250 RPM) has 81 more horse power than 2001 Peugeot 307. (87 HP @ 4000 RPM). In normal driving conditions, 1993 Ford Contour should accelerate faster than 2001 Peugeot 307. With that said, vehicle weight also plays an important factor in acceleration. 2001 Peugeot 307 weights approximately 67 kg more than 1993 Ford Contour.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Ford Contour (220 Nm @ 4250 RPM) has 14 more torque (in Nm) than 2001 Peugeot 307. (206 Nm @ 1750 RPM). This means 1993 Ford Contour will have an easier job in driving up hills or pulling heavy equipment than 2001 Peugeot 307.
Compare all specifications:
1993 Ford Contour | 2001 Peugeot 307 | |
Make | Ford | Peugeot |
Model | Contour | 307 |
Year Released | 1993 | 2001 |
Engine Position | Front | Front |
Engine Size | 2544 cc | 1997 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 168 HP | 87 HP |
Engine RPM | 6250 RPM | 4000 RPM |
Torque | 220 Nm | 206 Nm |
Torque RPM | 4250 RPM | 1750 RPM |
Engine Bore Size | 82.4 mm | 85 mm |
Engine Stroke Size | 79.5 mm | 88 mm |
Drive Type | Front | Front |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 3 doors |
Vehicle Weight | 1313 kg | 1380 kg |
Vehicle Length | 4680 mm | 4210 mm |
Vehicle Width | 1760 mm | 1750 mm |
Vehicle Height | 1400 mm | 1520 mm |
Wheelbase Size | 2710 mm | 2710 mm |