1993 Ford Falcon vs. 1960 Moretti 750

To start off, 1993 Ford Falcon is newer by 33 year(s). Which means there will be less support and parts availability for 1960 Moretti 750. In addition, the cost of maintenance, including insurance, on 1960 Moretti 750 would be higher. At 4,941 cc (8 cylinders), 1993 Ford Falcon is equipped with a bigger engine. In terms of performance, 1993 Ford Falcon (268 HP @ 5250 RPM) has 239 more horse power than 1960 Moretti 750. (29 HP @ 4800 RPM). In normal driving conditions, 1993 Ford Falcon should accelerate faster than 1960 Moretti 750. With that said, vehicle weight also plays an important factor in acceleration. 1993 Ford Falcon weights approximately 885 kg more than 1960 Moretti 750. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Ford Falcon (420 Nm @ 4000 RPM) has 357 more torque (in Nm) than 1960 Moretti 750. (63 Nm @ 3500 RPM). This means 1993 Ford Falcon will have an easier job in driving up hills or pulling heavy equipment than 1960 Moretti 750.

Compare all specifications:

1993 Ford Falcon 1960 Moretti 750
Make Ford Moretti
Model Falcon 750
Year Released 1993 1960
Engine Position Front Front
Engine Size 4941 cc 746 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 268 HP 29 HP
Engine RPM 5250 RPM 4800 RPM
Torque 420 Nm 63 Nm
Torque RPM 4000 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 4 seats
Vehicle Weight 1645 kg 760 kg
Vehicle Length 4820 mm 3760 mm
Vehicle Width 1860 mm 1510 mm
Vehicle Height 1410 mm 1460 mm
Wheelbase Size 2800 mm 2160 mm