1993 Italdesign Nazca vs. 1960 Lancia Flaminia
To start off, 1993 Italdesign Nazca is newer by 33 year(s). Which means there will be less support and parts availability for 1960 Lancia Flaminia. In addition, the cost of maintenance, including insurance, on 1960 Lancia Flaminia would be higher. At 4,988 cc (12 cylinders), 1993 Italdesign Nazca is equipped with a bigger engine. In terms of performance, 1993 Italdesign Nazca (346 HP) has 246 more horse power than 1960 Lancia Flaminia. (100 HP). In normal driving conditions, 1993 Italdesign Nazca should accelerate faster than 1960 Lancia Flaminia. With that said, vehicle weight also plays an important factor in acceleration. 1960 Lancia Flaminia weights approximately 273 kg more than 1993 Italdesign Nazca.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Italdesign Nazca (470 Nm @ 4000 RPM) has 283 more torque (in Nm) than 1960 Lancia Flaminia. (187 Nm @ 3500 RPM). This means 1993 Italdesign Nazca will have an easier job in driving up hills or pulling heavy equipment than 1960 Lancia Flaminia.
Compare all specifications:
1993 Italdesign Nazca | 1960 Lancia Flaminia | |
Make | Italdesign | Lancia |
Model | Nazca | Flaminia |
Year Released | 1993 | 1960 |
Engine Position | Middle | Front |
Engine Size | 4988 cc | 2458 cc |
Engine Cylinders | 12 cylinders | 6 cylinders |
Engine Type | V | V |
Horse Power | 346 HP | 100 HP |
Torque | 470 Nm | 187 Nm |
Torque RPM | 4000 RPM | 3500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1000 kg | 1273 kg |
Vehicle Length | 4400 mm | 4510 mm |
Vehicle Width | 2090 mm | 1670 mm |
Vehicle Height | 1110 mm | 1290 mm |
Wheelbase Size | 2610 mm | 2530 mm |