1993 Mercedes-Benz 280 vs. 1999 Ford Contour
To start off, 1999 Ford Contour is newer by 6 year(s). Which means there will be less support and parts availability for 1993 Mercedes-Benz 280. In addition, the cost of maintenance, including insurance, on 1993 Mercedes-Benz 280 would be higher. At 2,799 cc (6 cylinders), 1993 Mercedes-Benz 280 is equipped with a bigger engine. In terms of performance, 1993 Mercedes-Benz 280 (197 HP @ 5500 RPM) has 69 more horse power than 1999 Ford Contour. (128 HP @ 5500 RPM). In normal driving conditions, 1993 Mercedes-Benz 280 should accelerate faster than 1999 Ford Contour. With that said, vehicle weight also plays an important factor in acceleration. 1993 Mercedes-Benz 280 weights approximately 418 kg more than 1999 Ford Contour. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1993 Mercedes-Benz 280 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1993 Mercedes-Benz 280. However, in wet, icy, snow, or gravel driving conditions, 1999 Ford Contour, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Mercedes-Benz 280 (270 Nm @ 3750 RPM) has 95 more torque (in Nm) than 1999 Ford Contour. (175 Nm @ 4000 RPM). This means 1993 Mercedes-Benz 280 will have an easier job in driving up hills or pulling heavy equipment than 1999 Ford Contour. 1999 Ford Contour has automatic transmission and 1993 Mercedes-Benz 280 has manual transmission. 1993 Mercedes-Benz 280 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1999 Ford Contour will be easier to drive especially in heavy traffic.
Compare all specifications:
1993 Mercedes-Benz 280 | 1999 Ford Contour | |
Make | Mercedes-Benz | Ford |
Model | 280 | Contour |
Year Released | 1993 | 1999 |
Engine Position | Front | Front |
Engine Size | 2799 cc | 1989 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 197 HP | 128 HP |
Engine RPM | 5500 RPM | 5500 RPM |
Torque | 270 Nm | 175 Nm |
Torque RPM | 3750 RPM | 4000 RPM |
Engine Compression Ratio | 10.0:1 | 10.0:1 |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 5 doors | 4 doors |
Vehicle Weight | 1660 kg | 1242 kg |
Vehicle Length | 4770 mm | 4680 mm |
Vehicle Width | 1750 mm | 1760 mm |
Vehicle Height | 1500 mm | 1380 mm |
Wheelbase Size | 2700 mm | 2710 mm |