1993 Mercedes-Benz 280 vs. 2010 Toyota Sienna
To start off, 2010 Toyota Sienna is newer by 17 year(s). Which means there will be less support and parts availability for 1993 Mercedes-Benz 280. In addition, the cost of maintenance, including insurance, on 1993 Mercedes-Benz 280 would be higher. At 3,500 cc (6 cylinders), 2010 Toyota Sienna is equipped with a bigger engine. In terms of performance, 2010 Toyota Sienna (266 HP @ 6200 RPM) has 69 more horse power than 1993 Mercedes-Benz 280. (197 HP @ 5500 RPM) In normal driving conditions, 2010 Toyota Sienna should accelerate faster than 1993 Mercedes-Benz 280. With that said, vehicle weight also plays an important factor in acceleration. 2010 Toyota Sienna weights approximately 141 kg more than 1993 Mercedes-Benz 280. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1993 Mercedes-Benz 280 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1993 Mercedes-Benz 280. However, in wet, icy, snow, or gravel driving conditions, 2010 Toyota Sienna, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Toyota Sienna (332 Nm @ 4700 RPM) has 62 more torque (in Nm) than 1993 Mercedes-Benz 280. (270 Nm @ 3750 RPM). This means 2010 Toyota Sienna will have an easier job in driving up hills or pulling heavy equipment than 1993 Mercedes-Benz 280. 2010 Toyota Sienna has automatic transmission and 1993 Mercedes-Benz 280 has manual transmission. 1993 Mercedes-Benz 280 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Toyota Sienna will be easier to drive especially in heavy traffic.
Compare all specifications:
1993 Mercedes-Benz 280 | 2010 Toyota Sienna | |
Make | Mercedes-Benz | Toyota |
Model | 280 | Sienna |
Year Released | 1993 | 2010 |
Engine Position | Front | Front |
Engine Size | 2799 cc | 3500 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 197 HP | 266 HP |
Engine RPM | 5500 RPM | 6200 RPM |
Torque | 270 Nm | 332 Nm |
Torque RPM | 3750 RPM | 4700 RPM |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 5 seats | 7 seats |
Number of Doors | 4 doors | 5 doors |
Vehicle Weight | 1794 kg | 1935 kg |
Vehicle Length | 5550 mm | 5105 mm |
Vehicle Width | 1750 mm | 1966 mm |
Vehicle Height | 1440 mm | 1750 mm |
Wheelbase Size | 3610 mm | 3030 mm |
Fuel Tank Capacity | 70 L | 76 L |