1993 Mercedes-Benz E vs. 2008 Peugeot 1007
To start off, 2008 Peugeot 1007 is newer by 15 year(s). Which means there will be less support and parts availability for 1993 Mercedes-Benz E. In addition, the cost of maintenance, including insurance, on 1993 Mercedes-Benz E would be higher. At 3,606 cc (6 cylinders), 1993 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 1993 Mercedes-Benz E (268 HP @ 5750 RPM) has 201 more horse power than 2008 Peugeot 1007. (67 HP @ 4000 RPM). In normal driving conditions, 1993 Mercedes-Benz E should accelerate faster than 2008 Peugeot 1007. With that said, vehicle weight also plays an important factor in acceleration. 1993 Mercedes-Benz E weights approximately 297 kg more than 2008 Peugeot 1007. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1993 Mercedes-Benz E is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1993 Mercedes-Benz E. However, in wet, icy, snow, or gravel driving conditions, 2008 Peugeot 1007, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Mercedes-Benz E (385 Nm @ 3750 RPM) has 225 more torque (in Nm) than 2008 Peugeot 1007. (160 Nm @ 2000 RPM). This means 1993 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 2008 Peugeot 1007. 1993 Mercedes-Benz E has automatic transmission and 2008 Peugeot 1007 has manual transmission. 2008 Peugeot 1007 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1993 Mercedes-Benz E will be easier to drive especially in heavy traffic.
Compare all specifications:
1993 Mercedes-Benz E | 2008 Peugeot 1007 | |
Make | Mercedes-Benz | Peugeot |
Model | E | 1007 |
Year Released | 1993 | 2008 |
Body Type | Coupe | Hatchback |
Engine Position | Front | Front |
Engine Size | 3606 cc | 1398 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 268 HP | 67 HP |
Engine RPM | 5750 RPM | 4000 RPM |
Torque | 385 Nm | 160 Nm |
Torque RPM | 3750 RPM | 2000 RPM |
Engine Bore Size | 91 mm | 73.7 mm |
Engine Stroke Size | 92.4 mm | 82 mm |
Engine Compression Ratio | 10.5:1 | 18.0:1 |
Top Speed | 250 km/hour | 160 km/hour |
Acceleration 0-100mph | 7 seconds | 15.4 seconds |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 2 doors | 3 doors |
Vehicle Weight | 1540 kg | 1243 kg |
Vehicle Length | 4660 mm | 3740 mm |
Vehicle Width | 1750 mm | 1670 mm |
Vehicle Height | 1390 mm | 1630 mm |
Wheelbase Size | 2720 mm | 2320 mm |
Fuel Consumption Overall | 9.3 L/100km | 4.7 L/100km |