1993 Mercedes-Benz E vs. 2012 Hyundai i10
To start off, 2012 Hyundai i10 is newer by 19 year(s). Which means there will be less support and parts availability for 1993 Mercedes-Benz E. In addition, the cost of maintenance, including insurance, on 1993 Mercedes-Benz E would be higher. At 3,606 cc (6 cylinders), 1993 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 1993 Mercedes-Benz E (268 HP @ 5750 RPM) has 183 more horse power than 2012 Hyundai i10. (85 HP @ 6000 RPM). In normal driving conditions, 1993 Mercedes-Benz E should accelerate faster than 2012 Hyundai i10. With that said, vehicle weight also plays an important factor in acceleration. 1993 Mercedes-Benz E weights approximately 544 kg more than 2012 Hyundai i10. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1993 Mercedes-Benz E is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1993 Mercedes-Benz E. However, in wet, icy, snow, or gravel driving conditions, 2012 Hyundai i10, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1993 Mercedes-Benz E (385 Nm @ 3750 RPM) has 264 more torque (in Nm) than 2012 Hyundai i10. (121 Nm @ 4000 RPM). This means 1993 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 2012 Hyundai i10. 1993 Mercedes-Benz E has automatic transmission and 2012 Hyundai i10 has manual transmission. 2012 Hyundai i10 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1993 Mercedes-Benz E will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1993 Mercedes-Benz E | 2012 Hyundai i10 | |
| Make | Mercedes-Benz | Hyundai |
| Model | E | i10 |
| Year Released | 1993 | 2012 |
| Body Type | Coupe | Hatchback |
| Engine Position | Front | Front |
| Engine Size | 3606 cc | 1248 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 268 HP | 85 HP |
| Engine RPM | 5750 RPM | 6000 RPM |
| Torque | 385 Nm | 121 Nm |
| Torque RPM | 3750 RPM | 4000 RPM |
| Engine Bore Size | 91 mm | 71 mm |
| Engine Stroke Size | 92.4 mm | 78.8 mm |
| Engine Compression Ratio | 10.5:1 | 10.5:1 |
| Top Speed | 250 km/hour | 169 km/hour |
| Acceleration 0-100mph | 7 seconds | 12.2 seconds |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | 5-speed manual |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1540 kg | 996 kg |
| Vehicle Length | 4660 mm | 3565 mm |
| Vehicle Width | 1750 mm | 1595 mm |
| Vehicle Height | 1390 mm | 1540 mm |
| Wheelbase Size | 2720 mm | 2380 mm |
| Fuel Consumption Highway | 10.4 L/100km | 4.1 L/100km |
| Fuel Consumption City | 13.4 L/100km | 5.6 L/100km |
| Fuel Consumption Overall | 9.3 L/100km | 4.6 L/100km |
