1993 Peugeot 306 vs. 1968 Toyota Crown

To start off, 1993 Peugeot 306 is newer by 25 year(s). Which means there will be less support and parts availability for 1968 Toyota Crown. In addition, the cost of maintenance, including insurance, on 1968 Toyota Crown would be higher. At 2,599 cc, 1968 Toyota Crown is equipped with a bigger engine. In terms of performance, 1993 Peugeot 306 (103 HP @ 6000 RPM) has 5 more horse power than 1968 Toyota Crown. (98 HP @ 5000 RPM). In normal driving conditions, 1993 Peugeot 306 should accelerate faster than 1968 Toyota Crown. With that said, vehicle weight also plays an important factor in acceleration. 1968 Toyota Crown weights approximately 295 kg more than 1993 Peugeot 306.

Because 1968 Toyota Crown is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Toyota Crown. However, in wet, icy, snow, or gravel driving conditions, 1993 Peugeot 306, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Toyota Crown (201 Nm @ 3000 RPM) has 48 more torque (in Nm) than 1993 Peugeot 306. (153 Nm @ 3000 RPM). This means 1968 Toyota Crown will have an easier job in driving up hills or pulling heavy equipment than 1993 Peugeot 306.

Compare all specifications:

1993 Peugeot 306 1968 Toyota Crown
Make Peugeot Toyota
Model 306 Crown
Year Released 1993 1968
Engine Position Front Front
Engine Size 1761 cc 2599 cc
Horse Power 103 HP 98 HP
Engine RPM 6000 RPM 5000 RPM
Torque 153 Nm 201 Nm
Torque RPM 3000 RPM 3000 RPM
Drive Type Front Rear
Number of Seats 5 seats 5 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 1080 kg 1375 kg
Vehicle Length 4000 mm 4730 mm
Vehicle Width 1700 mm 1850 mm
Vehicle Height 1390 mm 1470 mm
Wheelbase Size 2480 mm 2750 mm