1994 Acura Integra vs. 2010 Ford Shelby GT 500
To start off, 2010 Ford Shelby GT 500 is newer by 16 year(s). Which means there will be less support and parts availability for 1994 Acura Integra. In addition, the cost of maintenance, including insurance, on 1994 Acura Integra would be higher. At 5,400 cc (8 cylinders), 2010 Ford Shelby GT 500 is equipped with a bigger engine. In terms of performance, 2010 Ford Shelby GT 500 (541 HP @ 6200 RPM) has 403 more horse power than 1994 Acura Integra. (138 HP @ 6300 RPM) In normal driving conditions, 2010 Ford Shelby GT 500 should accelerate faster than 1994 Acura Integra. With that said, vehicle weight also plays an important factor in acceleration. 2010 Ford Shelby GT 500 weights approximately 651 kg more than 1994 Acura Integra. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Ford Shelby GT 500 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Ford Shelby GT 500. However, in wet, icy, snow, or gravel driving conditions, 1994 Acura Integra, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Ford Shelby GT 500 (691 Nm @ 4500 RPM) has 519 more torque (in Nm) than 1994 Acura Integra. (172 Nm @ 5200 RPM). This means 2010 Ford Shelby GT 500 will have an easier job in driving up hills or pulling heavy equipment than 1994 Acura Integra. 1994 Acura Integra has automatic transmission and 2010 Ford Shelby GT 500 has manual transmission. 2010 Ford Shelby GT 500 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1994 Acura Integra will be easier to drive especially in heavy traffic.
Compare all specifications:
1994 Acura Integra | 2010 Ford Shelby GT 500 | |
Make | Acura | Ford |
Model | Integra | Shelby GT 500 |
Year Released | 1994 | 2010 |
Body Type | Coupe | Coupe |
Engine Position | Front | Front |
Engine Size | 1797 cc | 5400 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Horse Power | 138 HP | 541 HP |
Engine RPM | 6300 RPM | 6200 RPM |
Torque | 172 Nm | 691 Nm |
Torque RPM | 5200 RPM | 4500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 2 doors | 2 doors |
Vehicle Weight | 1170 kg | 1821 kg |
Vehicle Length | 4390 mm | 4780 mm |
Vehicle Width | 1700 mm | 1877 mm |
Vehicle Height | 1340 mm | 1420 mm |
Wheelbase Size | 2580 mm | 2720 mm |
Fuel Tank Capacity | 68 L | 61 L |