1994 Beijing BJ 2020 vs. 1950 Holden FX

To start off, 1994 Beijing BJ 2020 is newer by 44 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 2,444 cc (4 cylinders), 1994 Beijing BJ 2020 is equipped with a bigger engine. In terms of performance, 1994 Beijing BJ 2020 (83 HP) has 32 more horse power than 1950 Holden FX. (51 HP). In normal driving conditions, 1994 Beijing BJ 2020 should accelerate faster than 1950 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 1994 Beijing BJ 2020 weights approximately 580 kg more than 1950 Holden FX. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1994 Beijing BJ 2020 is four wheel drive (4WD), it will have significant more traction and grip than 1950 Holden FX. In wet, icy, snow, or gravel driving conditions, 1994 Beijing BJ 2020 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1994 Beijing BJ 2020 (173 Nm @ 2200 RPM) has 37 more torque (in Nm) than 1950 Holden FX. (136 Nm @ 2000 RPM). This means 1994 Beijing BJ 2020 will have an easier job in driving up hills or pulling heavy equipment than 1950 Holden FX.

Compare all specifications:

1994 Beijing BJ 2020 1950 Holden FX
Make Beijing Holden
Model BJ 2020 FX
Year Released 1994 1950
Engine Size 2444 cc 2165 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 83 HP 51 HP
Torque 173 Nm 136 Nm
Torque RPM 2200 RPM 2000 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Transmission Type Manual Manual
Vehicle Weight 1550 kg 970 kg
Vehicle Length 3870 mm 4380 mm
Vehicle Width 1760 mm 1710 mm
Vehicle Height 1880 mm 1580 mm
Wheelbase Size 2310 mm 2620 mm