1994 Lancia Kappa vs. 1980 Mitsubishi Sigma
To start off, 1994 Lancia Kappa is newer by 14 year(s). Which means there will be less support and parts availability for 1980 Mitsubishi Sigma. In addition, the cost of maintenance, including insurance, on 1980 Mitsubishi Sigma would be higher. At 2,554 cc (4 cylinders), 1980 Mitsubishi Sigma is equipped with a bigger engine. In terms of performance, 1994 Lancia Kappa (175 HP @ 6100 RPM) has 77 more horse power than 1980 Mitsubishi Sigma. (98 HP @ 4400 RPM). In normal driving conditions, 1994 Lancia Kappa should accelerate faster than 1980 Mitsubishi Sigma. With that said, vehicle weight also plays an important factor in acceleration. 1994 Lancia Kappa weights approximately 255 kg more than 1980 Mitsubishi Sigma. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Mitsubishi Sigma is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Mitsubishi Sigma. However, in wet, icy, snow, or gravel driving conditions, 1994 Lancia Kappa, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1994 Lancia Kappa (230 Nm @ 3750 RPM) has 42 more torque (in Nm) than 1980 Mitsubishi Sigma. (188 Nm @ 2400 RPM). This means 1994 Lancia Kappa will have an easier job in driving up hills or pulling heavy equipment than 1980 Mitsubishi Sigma. 1980 Mitsubishi Sigma has automatic transmission and 1994 Lancia Kappa has manual transmission. 1994 Lancia Kappa will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Mitsubishi Sigma will be easier to drive especially in heavy traffic.
Compare all specifications:
1994 Lancia Kappa | 1980 Mitsubishi Sigma | |
Make | Lancia | Mitsubishi |
Model | Kappa | Sigma |
Year Released | 1994 | 1980 |
Engine Position | Front | Front |
Engine Size | 2446 cc | 2554 cc |
Engine Cylinders | 5 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 175 HP | 98 HP |
Engine RPM | 6100 RPM | 4400 RPM |
Torque | 230 Nm | 188 Nm |
Torque RPM | 3750 RPM | 2400 RPM |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1450 kg | 1195 kg |
Vehicle Length | 4690 mm | 4460 mm |
Vehicle Width | 1870 mm | 1660 mm |
Vehicle Height | 1470 mm | 1370 mm |
Wheelbase Size | 2710 mm | 2520 mm |