1995 Beijing BJ 2020 vs. 1988 Vauxhall Carlton

To start off, 1995 Beijing BJ 2020 is newer by 7 year(s). Which means there will be less support and parts availability for 1988 Vauxhall Carlton. In addition, the cost of maintenance, including insurance, on 1988 Vauxhall Carlton would be higher. At 2,445 cc (4 cylinders), 1995 Beijing BJ 2020 is equipped with a bigger engine. In terms of performance, 1988 Vauxhall Carlton (89 HP @ 5200 RPM) has 6 more horse power than 1995 Beijing BJ 2020. (83 HP @ 3800 RPM) In normal driving conditions, 1988 Vauxhall Carlton should accelerate faster than 1995 Beijing BJ 2020. With that said, vehicle weight also plays an important factor in acceleration. 1995 Beijing BJ 2020 weights approximately 400 kg more than 1988 Vauxhall Carlton.

Because 1995 Beijing BJ 2020 is four wheel drive (4WD), it will have significant more traction and grip than 1988 Vauxhall Carlton. In wet, icy, snow, or gravel driving conditions, 1995 Beijing BJ 2020 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Beijing BJ 2020 (173 Nm @ 2200 RPM) has 22 more torque (in Nm) than 1988 Vauxhall Carlton. (151 Nm @ 3400 RPM). This means 1995 Beijing BJ 2020 will have an easier job in driving up hills or pulling heavy equipment than 1988 Vauxhall Carlton.

Compare all specifications:

1995 Beijing BJ 2020 1988 Vauxhall Carlton
Make Beijing Vauxhall
Model BJ 2020 Carlton
Year Released 1995 1988
Engine Size 2445 cc 1796 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 83 HP 89 HP
Engine RPM 3800 RPM 5200 RPM
Torque 173 Nm 151 Nm
Torque RPM 2200 RPM 3400 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD Rear
Transmission Type Manual Manual
Vehicle Weight 1550 kg 1150 kg
Vehicle Length 3870 mm 4690 mm
Vehicle Width 1760 mm 1780 mm
Vehicle Height 1880 mm 1450 mm
Wheelbase Size 2310 mm 2740 mm