1995 BMW 330 vs. 2010 Mazda 3

To start off, 2010 Mazda 3 is newer by 15 year(s). Which means there will be less support and parts availability for 1995 BMW 330. In addition, the cost of maintenance, including insurance, on 1995 BMW 330 would be higher. At 2,793 cc (6 cylinders), 1995 BMW 330 is equipped with a bigger engine. In terms of performance, 1995 BMW 330 (190 HP @ 5300 RPM) has 42 more horse power than 2010 Mazda 3. (148 HP @ 6500 RPM). In normal driving conditions, 1995 BMW 330 should accelerate faster than 2010 Mazda 3. With that said, vehicle weight also plays an important factor in acceleration. 1995 BMW 330 weights approximately 205 kg more than 2010 Mazda 3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1995 BMW 330 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1995 BMW 330. However, in wet, icy, snow, or gravel driving conditions, 2010 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 BMW 330 (280 Nm @ 3950 RPM) has 97 more torque (in Nm) than 2010 Mazda 3. (183 Nm @ 4500 RPM). This means 1995 BMW 330 will have an easier job in driving up hills or pulling heavy equipment than 2010 Mazda 3. 2010 Mazda 3 has automatic transmission and 1995 BMW 330 has manual transmission. 1995 BMW 330 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Mazda 3 will be easier to drive especially in heavy traffic.

Compare all specifications:

1995 BMW 330 2010 Mazda 3
Make BMW Mazda
Model 330 3
Year Released 1995 2010
Body Type Convertible Sedan
Engine Position Front Front
Engine Size 2793 cc 2000 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 190 HP 148 HP
Engine RPM 5300 RPM 6500 RPM
Torque 280 Nm 183 Nm
Torque RPM 3950 RPM 4500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual 5-speed automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1505 kg 1300 kg
Vehicle Length 4480 mm 4590 mm
Vehicle Width 1720 mm 1755 mm
Vehicle Height 1420 mm 1471 mm
Wheelbase Size 2710 mm 2639 mm
Fuel Tank Capacity 63 L 55 L