1995 BMW M3 vs. 2008 Mazda 6
To start off, 2008 Mazda 6 is newer by 13 year(s). Which means there will be less support and parts availability for 1995 BMW M3. In addition, the cost of maintenance, including insurance, on 1995 BMW M3 would be higher. At 2,988 cc (6 cylinders), 1995 BMW M3 is equipped with a bigger engine. In terms of performance, 1995 BMW M3 (282 HP @ 7000 RPM) has 126 more horse power than 2008 Mazda 6. (156 HP @ 6500 RPM). In normal driving conditions, 1995 BMW M3 should accelerate faster than 2008 Mazda 6. With that said, vehicle weight also plays an important factor in acceleration. 1995 BMW M3 weights approximately 136 kg more than 2008 Mazda 6. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1995 BMW M3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1995 BMW M3. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 6, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 BMW M3 (320 Nm @ 3400 RPM) has 111 more torque (in Nm) than 2008 Mazda 6. (209 Nm @ 4000 RPM). This means 1995 BMW M3 will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 6. 2008 Mazda 6 has automatic transmission and 1995 BMW M3 has manual transmission. 1995 BMW M3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mazda 6 will be easier to drive especially in heavy traffic.
Compare all specifications:
1995 BMW M3 | 2008 Mazda 6 | |
Make | BMW | Mazda |
Model | M3 | 6 |
Year Released | 1995 | 2008 |
Engine Position | Front | Front |
Engine Size | 2988 cc | 2260 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 282 HP | 156 HP |
Engine RPM | 7000 RPM | 6500 RPM |
Torque | 320 Nm | 209 Nm |
Torque RPM | 3400 RPM | 4000 RPM |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1465 kg | 1329 kg |
Vehicle Length | 4440 mm | 4750 mm |
Vehicle Width | 1710 mm | 1790 mm |
Vehicle Height | 1370 mm | 1450 mm |
Wheelbase Size | 2710 mm | 2680 mm |
Fuel Tank Capacity | 65 L | 68 L |