1995 BMW M5 vs. 1974 Mitsubishi Minica

To start off, 1995 BMW M5 is newer by 21 year(s). Which means there will be less support and parts availability for 1974 Mitsubishi Minica. In addition, the cost of maintenance, including insurance, on 1974 Mitsubishi Minica would be higher. At 3,794 cc (6 cylinders), 1995 BMW M5 is equipped with a bigger engine. In terms of performance, 1995 BMW M5 (335 HP @ 6900 RPM) has 308 more horse power than 1974 Mitsubishi Minica. (27 HP @ 8000 RPM). In normal driving conditions, 1995 BMW M5 should accelerate faster than 1974 Mitsubishi Minica. With that said, vehicle weight also plays an important factor in acceleration. 1995 BMW M5 weights approximately 1215 kg more than 1974 Mitsubishi Minica. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 BMW M5 (400 Nm @ 4750 RPM) has 372 more torque (in Nm) than 1974 Mitsubishi Minica. (28 Nm @ 5500 RPM). This means 1995 BMW M5 will have an easier job in driving up hills or pulling heavy equipment than 1974 Mitsubishi Minica.

Compare all specifications:

1995 BMW M5 1974 Mitsubishi Minica
Make BMW Mitsubishi
Model M5 Minica
Year Released 1995 1974
Engine Position Front Front
Engine Size 3794 cc 358 cc
Engine Cylinders 6 cylinders 2 cylinders
Engine Type in-line in-line
Horse Power 335 HP 27 HP
Engine RPM 6900 RPM 8000 RPM
Torque 400 Nm 28 Nm
Torque RPM 4750 RPM 5500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1725 kg 510 kg
Vehicle Length 4730 mm 3000 mm
Vehicle Width 1760 mm 1300 mm
Vehicle Height 1760 mm 1320 mm
Wheelbase Size 2770 mm 2010 mm