1995 BMW S3 vs. 2005 Proton Impian
To start off, 2005 Proton Impian is newer by 10 year(s). Which means there will be less support and parts availability for 1995 BMW S3. In addition, the cost of maintenance, including insurance, on 1995 BMW S3 would be higher. At 2,497 cc (6 cylinders), 1995 BMW S3 is equipped with a bigger engine. In terms of performance, 1995 BMW S3 (338 HP @ 4800 RPM) has 237 more horse power than 2005 Proton Impian. (101 HP @ 6000 RPM). In normal driving conditions, 1995 BMW S3 should accelerate faster than 2005 Proton Impian. With that said, vehicle weight also plays an important factor in acceleration. 1995 BMW S3 weights approximately 520 kg more than 2005 Proton Impian. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1995 BMW S3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1995 BMW S3. However, in wet, icy, snow, or gravel driving conditions, 2005 Proton Impian, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 BMW S3 (260 Nm) has 120 more torque (in Nm) than 2005 Proton Impian. (140 Nm). This means 1995 BMW S3 will have an easier job in driving up hills or pulling heavy equipment than 2005 Proton Impian. 2005 Proton Impian has automatic transmission and 1995 BMW S3 has manual transmission. 1995 BMW S3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2005 Proton Impian will be easier to drive especially in heavy traffic.
Compare all specifications:
1995 BMW S3 | 2005 Proton Impian | |
Make | BMW | Proton |
Model | S3 | Impian |
Year Released | 1995 | 2005 |
Engine Size | 2497 cc | 1584 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 338 HP | 101 HP |
Engine RPM | 4800 RPM | 6000 RPM |
Torque | 260 Nm | 140 Nm |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1725 kg | 1205 kg |
Vehicle Length | 4440 mm | 4470 mm |
Vehicle Width | 1720 mm | 1750 mm |
Vehicle Height | 1370 mm | 1430 mm |
Wheelbase Size | 2770 mm | 2610 mm |