1995 BMW S3 vs. 2012 Ford Mondeo
To start off, 2012 Ford Mondeo is newer by 17 year(s). Which means there will be less support and parts availability for 1995 BMW S3. In addition, the cost of maintenance, including insurance, on 1995 BMW S3 would be higher. At 2,497 cc (6 cylinders), 1995 BMW S3 is equipped with a bigger engine. In terms of performance, 1995 BMW S3 (338 HP @ 4800 RPM) has 195 more horse power than 2012 Ford Mondeo. (143 HP @ 6000 RPM). In normal driving conditions, 1995 BMW S3 should accelerate faster than 2012 Ford Mondeo. With that said, vehicle weight also plays an important factor in acceleration. 1995 BMW S3 weights approximately 288 kg more than 2012 Ford Mondeo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1995 BMW S3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1995 BMW S3. However, in wet, icy, snow, or gravel driving conditions, 2012 Ford Mondeo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 BMW S3 (260 Nm) has 69 more torque (in Nm) than 2012 Ford Mondeo. (191 Nm). This means 1995 BMW S3 will have an easier job in driving up hills or pulling heavy equipment than 2012 Ford Mondeo. 2012 Ford Mondeo has automatic transmission and 1995 BMW S3 has manual transmission. 1995 BMW S3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Ford Mondeo will be easier to drive especially in heavy traffic.
Compare all specifications:
1995 BMW S3 | 2012 Ford Mondeo | |
Make | BMW | Ford |
Model | S3 | Mondeo |
Year Released | 1995 | 2012 |
Engine Position | Front | Front |
Engine Size | 2497 cc | 1999 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 338 HP | 143 HP |
Engine RPM | 4800 RPM | 6000 RPM |
Torque | 260 Nm | 191 Nm |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 5 seats |
Vehicle Weight | 1725 kg | 1437 kg |
Vehicle Length | 4440 mm | 4810 mm |
Vehicle Width | 1720 mm | 1820 mm |
Vehicle Height | 1370 mm | 1430 mm |
Wheelbase Size | 2770 mm | 2760 mm |