1995 Bristol Blenheim vs. 2010 Fiat Panda
To start off, 2010 Fiat Panda is newer by 15 year(s). Which means there will be less support and parts availability for 1995 Bristol Blenheim. In addition, the cost of maintenance, including insurance, on 1995 Bristol Blenheim would be higher. At 5,896 cc (8 cylinders), 1995 Bristol Blenheim is equipped with a bigger engine. In terms of performance, 1995 Bristol Blenheim (228 HP @ 4000 RPM) has 156 more horse power than 2010 Fiat Panda. (72 HP @ 6000 RPM). In normal driving conditions, 1995 Bristol Blenheim should accelerate faster than 2010 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 1995 Bristol Blenheim weights approximately 695 kg more than 2010 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1995 Bristol Blenheim is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1995 Bristol Blenheim. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Bristol Blenheim (440 Nm @ 3200 RPM) has 309 more torque (in Nm) than 2010 Fiat Panda. (131 Nm @ 4250 RPM). This means 1995 Bristol Blenheim will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Panda. 1995 Bristol Blenheim has automatic transmission and 2010 Fiat Panda has manual transmission. 2010 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1995 Bristol Blenheim will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1995 Bristol Blenheim | 2010 Fiat Panda | |
| Make | Bristol | Fiat |
| Model | Blenheim | Panda |
| Year Released | 1995 | 2010 |
| Engine Position | Front | Front |
| Engine Size | 5896 cc | 1368 cc |
| Engine Cylinders | 8 cylinders | 4 cylinders |
| Engine Type | V | in-line |
| Horse Power | 228 HP | 72 HP |
| Engine RPM | 4000 RPM | 6000 RPM |
| Torque | 440 Nm | 131 Nm |
| Torque RPM | 3200 RPM | 4250 RPM |
| Fuel Type | Gasoline | Gasoline - Premium |
| Drive Type | Rear | Front |
| Transmission Type | Automatic | Manual |
| Vehicle Weight | 1745 kg | 1050 kg |
| Vehicle Length | 4880 mm | 3580 mm |
| Vehicle Width | 1760 mm | 1610 mm |
| Vehicle Height | 1450 mm | 1570 mm |
| Wheelbase Size | 2910 mm | 2310 mm |
