1995 Bugatti EB 110 vs. 2008 Mazda 6

To start off, 2008 Mazda 6 is newer by 13 year(s). Which means there will be less support and parts availability for 1995 Bugatti EB 110. In addition, the cost of maintenance, including insurance, on 1995 Bugatti EB 110 would be higher. At 3,499 cc (12 cylinders), 1995 Bugatti EB 110 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1995 Bugatti EB 110 weights approximately 311 kg more than 2008 Mazda 6.

Because 1995 Bugatti EB 110 is four wheel drive (4WD), it will have significant more traction and grip than 2008 Mazda 6. In wet, icy, snow, or gravel driving conditions, 1995 Bugatti EB 110 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Bugatti EB 110 (611 Nm @ 3750 RPM) has 427 more torque (in Nm) than 2008 Mazda 6. (184 Nm @ 4000 RPM). This means 1995 Bugatti EB 110 will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 6.

Compare all specifications:

1995 Bugatti EB 110 2008 Mazda 6
Make Bugatti Mazda
Model EB 110 6
Year Released 1995 2008
Body Type Coupe Sedan
Engine Position Middle Front
Engine Size 3499 cc 1999 cc
Engine Cylinders 12 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 5 valves 4 valves
Horse Power 553 HP 0 HP
Torque 611 Nm 184 Nm
Torque RPM 3750 RPM 4000 RPM
Engine Bore Size 81 mm 87.5 mm
Engine Stroke Size 56.6 mm 83.1 mm
Engine Compression Ratio 7.5:1 10.8:1
Fuel Type Gasoline Gasoline
Top Speed 344 km/hour 211 km/hour
Drive Type 4WD Front
Transmission Type Manual Manual
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1605 kg 1294 kg
Vehicle Length 4410 mm 4500 mm
Vehicle Height 1120 mm 1760 mm
Wheelbase Size 2560 mm 2680 mm
Fuel Tank Capacity 120 L 64 L