1995 Buick Roadmaster vs. 2000 Chrysler Panel Cruiser
To start off, 2000 Chrysler Panel Cruiser is newer by 5 year(s). Which means there will be less support and parts availability for 1995 Buick Roadmaster. In addition, the cost of maintenance, including insurance, on 1995 Buick Roadmaster would be higher. At 5,733 cc (8 cylinders), 1995 Buick Roadmaster is equipped with a bigger engine. In terms of performance, 1995 Buick Roadmaster (257 HP @ 5000 RPM) has 57 more horse power than 2000 Chrysler Panel Cruiser. (200 HP @ 6400 RPM). In normal driving conditions, 1995 Buick Roadmaster should accelerate faster than 2000 Chrysler Panel Cruiser. With that said, vehicle weight also plays an important factor in acceleration. 1995 Buick Roadmaster weights approximately 286 kg more than 2000 Chrysler Panel Cruiser. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1995 Buick Roadmaster is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1995 Buick Roadmaster. However, in wet, icy, snow, or gravel driving conditions, 2000 Chrysler Panel Cruiser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Buick Roadmaster (447 Nm) has 176 more torque (in Nm) than 2000 Chrysler Panel Cruiser. (271 Nm). This means 1995 Buick Roadmaster will have an easier job in driving up hills or pulling heavy equipment than 2000 Chrysler Panel Cruiser. 1995 Buick Roadmaster has automatic transmission and 2000 Chrysler Panel Cruiser has manual transmission. 2000 Chrysler Panel Cruiser will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1995 Buick Roadmaster will be easier to drive especially in heavy traffic.
Compare all specifications:
1995 Buick Roadmaster | 2000 Chrysler Panel Cruiser | |
Make | Buick | Chrysler |
Model | Roadmaster | Panel Cruiser |
Year Released | 1995 | 2000 |
Engine Position | Front | Front |
Engine Size | 5733 cc | 2398 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | V | in-line |
Horse Power | 257 HP | 200 HP |
Engine RPM | 5000 RPM | 6400 RPM |
Torque | 447 Nm | 271 Nm |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 2 seats |
Vehicle Weight | 1850 kg | 1564 kg |
Vehicle Length | 5490 mm | 4290 mm |
Vehicle Width | 1990 mm | 1710 mm |
Vehicle Height | 1450 mm | 1610 mm |
Wheelbase Size | 2950 mm | 2620 mm |