1995 Chrysler Sebring vs. 1968 Plymouth VIP
To start off, 1995 Chrysler Sebring is newer by 27 year(s). Which means there will be less support and parts availability for 1968 Plymouth VIP. In addition, the cost of maintenance, including insurance, on 1968 Plymouth VIP would be higher. At 5,208 cc (8 cylinders), 1968 Plymouth VIP is equipped with a bigger engine. In terms of performance, 1968 Plymouth VIP (230 HP @ 4400 RPM) has 90 more horse power than 1995 Chrysler Sebring. (140 HP @ 6000 RPM) In normal driving conditions, 1968 Plymouth VIP should accelerate faster than 1995 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 1968 Plymouth VIP weights approximately 328 kg more than 1995 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1968 Plymouth VIP is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1968 Plymouth VIP. However, in wet, icy, snow, or gravel driving conditions, 1995 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1968 Plymouth VIP (461 Nm @ 2400 RPM) has 285 more torque (in Nm) than 1995 Chrysler Sebring. (176 Nm @ 4800 RPM). This means 1968 Plymouth VIP will have an easier job in driving up hills or pulling heavy equipment than 1995 Chrysler Sebring. 1968 Plymouth VIP has automatic transmission and 1995 Chrysler Sebring has manual transmission. 1995 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1968 Plymouth VIP will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1995 Chrysler Sebring | 1968 Plymouth VIP | |
| Make | Chrysler | Plymouth |
| Model | Sebring | VIP |
| Year Released | 1995 | 1968 |
| Engine Position | Front | Front |
| Engine Size | 1996 cc | 5208 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Horse Power | 140 HP | 230 HP |
| Engine RPM | 6000 RPM | 4400 RPM |
| Torque | 176 Nm | 461 Nm |
| Torque RPM | 4800 RPM | 2400 RPM |
| Engine Bore Size | 87.5 mm | 99.3 mm |
| Engine Stroke Size | 83 mm | 84.1 mm |
| Engine Compression Ratio | 9.6:1 | 9.2:1 |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 4 seats | 5 seats |
| Number of Doors | 2 doors | 2 doors |
| Vehicle Weight | 1319 kg | 1647 kg |
| Vehicle Length | 4770 mm | 5420 mm |
| Vehicle Width | 1780 mm | 1980 mm |
| Vehicle Height | 1300 mm | 1400 mm |
| Wheelbase Size | 2640 mm | 3030 mm |
| Fuel Tank Capacity | 60 L | 90 L |
