1995 Chrysler Sebring vs. 2012 Ford Crown Victoria
To start off, 2012 Ford Crown Victoria is newer by 17 year(s). Which means there will be less support and parts availability for 1995 Chrysler Sebring. In addition, the cost of maintenance, including insurance, on 1995 Chrysler Sebring would be higher. At 4,605 cc (8 cylinders), 2012 Ford Crown Victoria is equipped with a bigger engine. In terms of performance, 2012 Ford Crown Victoria (224 HP @ 4750 RPM) has 86 more horse power than 1995 Chrysler Sebring. (138 HP @ 6000 RPM) In normal driving conditions, 2012 Ford Crown Victoria should accelerate faster than 1995 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 2012 Ford Crown Victoria weights approximately 1546 kg more than 1995 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2012 Ford Crown Victoria is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2012 Ford Crown Victoria. However, in wet, icy, snow, or gravel driving conditions, 1995 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Ford Crown Victoria (359 Nm) has 183 more torque (in Nm) than 1995 Chrysler Sebring. (176 Nm). This means 2012 Ford Crown Victoria will have an easier job in driving up hills or pulling heavy equipment than 1995 Chrysler Sebring. 2012 Ford Crown Victoria has automatic transmission and 1995 Chrysler Sebring has manual transmission. 1995 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Ford Crown Victoria will be easier to drive especially in heavy traffic.
Compare all specifications:
1995 Chrysler Sebring | 2012 Ford Crown Victoria | |
Make | Chrysler | Ford |
Model | Sebring | Crown Victoria |
Year Released | 1995 | 2012 |
Engine Position | Front | Front |
Engine Size | 1996 cc | 4605 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 138 HP | 224 HP |
Engine RPM | 6000 RPM | 4750 RPM |
Torque | 176 Nm | 359 Nm |
Engine Bore Size | 87.5 mm | 90.2 mm |
Engine Stroke Size | 83 mm | 90 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 6 seats |
Vehicle Weight | 1310 kg | 2856 kg |
Vehicle Length | 4770 mm | 5390 mm |
Vehicle Width | 1780 mm | 1970 mm |