1995 Chrysler Viper vs. 1980 Mazda 929

To start off, 1995 Chrysler Viper is newer by 15 year(s). Which means there will be less support and parts availability for 1980 Mazda 929. In addition, the cost of maintenance, including insurance, on 1980 Mazda 929 would be higher. At 7,986 cc (10 cylinders), 1995 Chrysler Viper is equipped with a bigger engine. In terms of performance, 1995 Chrysler Viper (389 HP @ 5150 RPM) has 306 more horse power than 1980 Mazda 929. (83 HP @ 5000 RPM). In normal driving conditions, 1995 Chrysler Viper should accelerate faster than 1980 Mazda 929. With that said, vehicle weight also plays an important factor in acceleration. 1995 Chrysler Viper weights approximately 440 kg more than 1980 Mazda 929. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Chrysler Viper (620 Nm @ 3600 RPM) has 483 more torque (in Nm) than 1980 Mazda 929. (137 Nm @ 3000 RPM). This means 1995 Chrysler Viper will have an easier job in driving up hills or pulling heavy equipment than 1980 Mazda 929.

Compare all specifications:

1995 Chrysler Viper 1980 Mazda 929
Make Chrysler Mazda
Model Viper 929
Year Released 1995 1980
Engine Position Front Front
Engine Size 7986 cc 1769 cc
Engine Cylinders 10 cylinders 4 cylinders
Engine Type V in-line
Horse Power 389 HP 83 HP
Engine RPM 5150 RPM 5000 RPM
Torque 620 Nm 137 Nm
Torque RPM 3600 RPM 3000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1590 kg 1150 kg
Vehicle Length 4460 mm 4550 mm
Vehicle Width 1930 mm 1670 mm
Vehicle Height 1130 mm 1420 mm
Wheelbase Size 2450 mm 2520 mm