1995 Ferrari 512 M vs. 1950 Holden FX
To start off, 1995 Ferrari 512 M is newer by 45 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 4,942 cc, 1995 Ferrari 512 M is equipped with a bigger engine. In terms of performance, 1995 Ferrari 512 M (423 HP) has 372 more horse power than 1950 Holden FX. (51 HP). In normal driving conditions, 1995 Ferrari 512 M should accelerate faster than 1950 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 1995 Ferrari 512 M weights approximately 485 kg more than 1950 Holden FX. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Ferrari 512 M (500 Nm @ 5500 RPM) has 364 more torque (in Nm) than 1950 Holden FX. (136 Nm @ 2000 RPM). This means 1995 Ferrari 512 M will have an easier job in driving up hills or pulling heavy equipment than 1950 Holden FX.
Compare all specifications:
1995 Ferrari 512 M | 1950 Holden FX | |
Make | Ferrari | Holden |
Model | 512 M | FX |
Year Released | 1995 | 1950 |
Engine Position | Middle | Front |
Engine Size | 4942 cc | 2165 cc |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 423 HP | 51 HP |
Torque | 500 Nm | 136 Nm |
Torque RPM | 5500 RPM | 2000 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1455 kg | 970 kg |
Vehicle Length | 4490 mm | 4380 mm |
Vehicle Width | 1980 mm | 1710 mm |
Vehicle Height | 1140 mm | 1580 mm |
Wheelbase Size | 2560 mm | 2620 mm |