1995 Fiat Bravo vs. 1951 Humber Pullman

To start off, 1995 Fiat Bravo is newer by 44 year(s). Which means there will be less support and parts availability for 1951 Humber Pullman. In addition, the cost of maintenance, including insurance, on 1951 Humber Pullman would be higher. At 4,085 cc (6 cylinders), 1951 Humber Pullman is equipped with a bigger engine. In terms of performance, 1951 Humber Pullman (100 HP @ 3400 RPM) has 25 more horse power than 1995 Fiat Bravo. (75 HP @ 4200 RPM) In normal driving conditions, 1951 Humber Pullman should accelerate faster than 1995 Fiat Bravo. With that said, vehicle weight also plays an important factor in acceleration. 1951 Humber Pullman weights approximately 887 kg more than 1995 Fiat Bravo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1951 Humber Pullman is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1951 Humber Pullman. However, in wet, icy, snow, or gravel driving conditions, 1995 Fiat Bravo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1995 Fiat Bravo 1951 Humber Pullman
Make Fiat Humber
Model Bravo Pullman
Year Released 1995 1951
Engine Position Front Front
Engine Size 1895 cc 4085 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 75 HP 100 HP
Engine RPM 4200 RPM 3400 RPM
Engine Bore Size 82 mm 85 mm
Engine Stroke Size 90.4 mm 120 mm
Engine Compression Ratio 21.0:1 6.3:1
Top Speed 165 km/hour 132 km/hour
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 5 seats 8 seats
Number of Doors 3 doors 4 doors
Vehicle Weight 1145 kg 2032 kg
Vehicle Length 4030 mm 5390 mm
Vehicle Width 1760 mm 1910 mm
Wheelbase Size 2550 mm 3330 mm