1995 Fiat Coupe vs. 1987 Mercury Lynx
To start off, 1995 Fiat Coupe is newer by 8 year(s). Which means there will be less support and parts availability for 1987 Mercury Lynx. In addition, the cost of maintenance, including insurance, on 1987 Mercury Lynx would be higher. At 1,909 cc (4 cylinders), 1995 Fiat Coupe is equipped with a bigger engine. In terms of performance, 1995 Fiat Coupe (195 HP @ 5500 RPM) has 106 more horse power than 1987 Mercury Lynx. (89 HP @ 4600 RPM). In normal driving conditions, 1995 Fiat Coupe should accelerate faster than 1987 Mercury Lynx. With that said, vehicle weight also plays an important factor in acceleration. 1995 Fiat Coupe weights approximately 255 kg more than 1987 Mercury Lynx. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Fiat Coupe (295 Nm @ 3400 RPM) has 151 more torque (in Nm) than 1987 Mercury Lynx. (144 Nm @ 3400 RPM). This means 1995 Fiat Coupe will have an easier job in driving up hills or pulling heavy equipment than 1987 Mercury Lynx.
Compare all specifications:
| 1995 Fiat Coupe | 1987 Mercury Lynx | |
| Make | Fiat | Mercury |
| Model | Coupe | Lynx |
| Year Released | 1995 | 1987 |
| Engine Position | Front | Front |
| Engine Size | 1909 cc | 1859 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 195 HP | 89 HP |
| Engine RPM | 5500 RPM | 4600 RPM |
| Torque | 295 Nm | 144 Nm |
| Torque RPM | 3400 RPM | 3400 RPM |
| Drive Type | Front | Front |
| Vehicle Weight | 1280 kg | 1025 kg |
| Vehicle Length | 4260 mm | 4300 mm |
| Vehicle Width | 1770 mm | 1680 mm |
| Vehicle Height | 1350 mm | 1370 mm |
| Wheelbase Size | 2550 mm | 2400 mm |
