1995 Lancia Ypsilon vs. 1956 Mercedes-Benz 220
To start off, 1995 Lancia Ypsilon is newer by 39 year(s). Which means there will be less support and parts availability for 1956 Mercedes-Benz 220. In addition, the cost of maintenance, including insurance, on 1956 Mercedes-Benz 220 would be higher. At 2,195 cc (6 cylinders), 1956 Mercedes-Benz 220 is equipped with a bigger engine. In terms of performance, 1956 Mercedes-Benz 220 (98 HP @ 4800 RPM) has 20 more horse power than 1995 Lancia Ypsilon. (78 HP @ 4100 RPM) In normal driving conditions, 1956 Mercedes-Benz 220 should accelerate faster than 1995 Lancia Ypsilon. With that said, vehicle weight also plays an important factor in acceleration. 1956 Mercedes-Benz 220 weights approximately 456 kg more than 1995 Lancia Ypsilon. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1956 Mercedes-Benz 220 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1956 Mercedes-Benz 220. However, in wet, icy, snow, or gravel driving conditions, 1995 Lancia Ypsilon, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 Mercedes-Benz 220 (162 Nm) has 48 more torque (in Nm) than 1995 Lancia Ypsilon. (114 Nm). This means 1956 Mercedes-Benz 220 will have an easier job in driving up hills or pulling heavy equipment than 1995 Lancia Ypsilon.
Compare all specifications:
1995 Lancia Ypsilon | 1956 Mercedes-Benz 220 | |
Make | Lancia | Mercedes-Benz |
Model | Ypsilon | 220 |
Year Released | 1995 | 1956 |
Engine Position | Front | Front |
Engine Size | 1242 cc | 2195 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 78 HP | 98 HP |
Engine RPM | 4100 RPM | 4800 RPM |
Torque | 114 Nm | 162 Nm |
Engine Bore Size | 70.9 mm | 80 mm |
Engine Stroke Size | 78.7 mm | 72.8 mm |
Engine Compression Ratio | 10.6:1 | 7.6:1 |
Top Speed | 165 km/hour | 160 km/hour |
Drive Type | Front | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 3 doors | 2 doors |
Vehicle Weight | 900 kg | 1356 kg |
Vehicle Length | 3780 mm | 4710 mm |
Vehicle Width | 1710 mm | 1800 mm |
Vehicle Height | 1540 mm | 1540 mm |
Wheelbase Size | 2390 mm | 2710 mm |