1995 Lancia Ypsilon vs. 2008 Mercedes-Benz CL
To start off, 2008 Mercedes-Benz CL is newer by 13 year(s). Which means there will be less support and parts availability for 1995 Lancia Ypsilon. In addition, the cost of maintenance, including insurance, on 1995 Lancia Ypsilon would be higher. At 5,461 cc (8 cylinders), 2008 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2008 Mercedes-Benz CL (383 HP @ 6000 RPM) has 305 more horse power than 1995 Lancia Ypsilon. (78 HP @ 4100 RPM) In normal driving conditions, 2008 Mercedes-Benz CL should accelerate faster than 1995 Lancia Ypsilon. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mercedes-Benz CL weights approximately 1095 kg more than 1995 Lancia Ypsilon. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Mercedes-Benz CL is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Mercedes-Benz CL. However, in wet, icy, snow, or gravel driving conditions, 1995 Lancia Ypsilon, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mercedes-Benz CL (531 Nm) has 417 more torque (in Nm) than 1995 Lancia Ypsilon. (114 Nm). This means 2008 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 1995 Lancia Ypsilon. 2008 Mercedes-Benz CL has automatic transmission and 1995 Lancia Ypsilon has manual transmission. 1995 Lancia Ypsilon will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mercedes-Benz CL will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1995 Lancia Ypsilon | 2008 Mercedes-Benz CL | |
| Make | Lancia | Mercedes-Benz |
| Model | Ypsilon | CL |
| Year Released | 1995 | 2008 |
| Body Type | Hatchback | Coupe |
| Engine Position | Front | Front |
| Engine Size | 1242 cc | 5461 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 4 valves | 3 valves |
| Horse Power | 78 HP | 383 HP |
| Engine RPM | 4100 RPM | 6000 RPM |
| Torque | 114 Nm | 531 Nm |
| Engine Bore Size | 70.9 mm | 98 mm |
| Engine Stroke Size | 78.7 mm | 90.5 mm |
| Top Speed | 165 km/hour | 250 km/hour |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 4 seats |
| Number of Doors | 3 doors | 2 doors |
| Vehicle Weight | 900 kg | 1995 kg |
| Vehicle Length | 3780 mm | 5070 mm |
| Vehicle Width | 1710 mm | 1880 mm |
| Vehicle Height | 1540 mm | 1420 mm |
| Wheelbase Size | 2390 mm | 2960 mm |
