1995 Lancia Zeta vs. 2002 Tata Indigo
To start off, 2002 Tata Indigo is newer by 7 year(s). Which means there will be less support and parts availability for 1995 Lancia Zeta. In addition, the cost of maintenance, including insurance, on 1995 Lancia Zeta would be higher. At 1,998 cc (4 cylinders), 1995 Lancia Zeta is equipped with a bigger engine. In terms of performance, 1995 Lancia Zeta (145 HP @ 5300 RPM) has 86 more horse power than 2002 Tata Indigo. (59 HP @ 5000 RPM). In normal driving conditions, 1995 Lancia Zeta should accelerate faster than 2002 Tata Indigo. With that said, vehicle weight also plays an important factor in acceleration. 1995 Lancia Zeta weights approximately 630 kg more than 2002 Tata Indigo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Lancia Zeta (236 Nm @ 2500 RPM) has 131 more torque (in Nm) than 2002 Tata Indigo. (105 Nm @ 2500 RPM). This means 1995 Lancia Zeta will have an easier job in driving up hills or pulling heavy equipment than 2002 Tata Indigo.
Compare all specifications:
1995 Lancia Zeta | 2002 Tata Indigo | |
Make | Lancia | Tata |
Model | Zeta | Indigo |
Year Released | 1995 | 2002 |
Engine Size | 1998 cc | 1405 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 145 HP | 59 HP |
Engine RPM | 5300 RPM | 5000 RPM |
Torque | 236 Nm | 105 Nm |
Torque RPM | 2500 RPM | 2500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Vehicle Weight | 1650 kg | 1020 kg |
Vehicle Length | 4480 mm | 4160 mm |
Vehicle Width | 1840 mm | 1630 mm |
Vehicle Height | 1720 mm | 1490 mm |
Wheelbase Size | 2830 mm | 2410 mm |