1995 Mazda MX-3 vs. 2008 Mercedes-Benz CLK

To start off, 2008 Mercedes-Benz CLK is newer by 13 year(s). Which means there will be less support and parts availability for 1995 Mazda MX-3. In addition, the cost of maintenance, including insurance, on 1995 Mazda MX-3 would be higher. At 4,966 cc (8 cylinders), 2008 Mercedes-Benz CLK is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mercedes-Benz CLK weights approximately 840 kg more than 1995 Mazda MX-3.

Because 2008 Mercedes-Benz CLK is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Mercedes-Benz CLK. However, in wet, icy, snow, or gravel driving conditions, 1995 Mazda MX-3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mercedes-Benz CLK (460 Nm) has 324 more torque (in Nm) than 1995 Mazda MX-3. (136 Nm). This means 2008 Mercedes-Benz CLK will have an easier job in driving up hills or pulling heavy equipment than 1995 Mazda MX-3.

Compare all specifications:

1995 Mazda MX-3 2008 Mercedes-Benz CLK
Make Mazda Mercedes-Benz
Model MX-3 CLK
Year Released 1995 2008
Body Type Hatchback Coupe
Engine Position Front Front
Engine Size 1598 cc 4966 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 3 valves
Horse Power 105 HP 0 HP
Torque 136 Nm 460 Nm
Engine Compression Ratio 9.0:1 10.0:1
Drive Type Front Rear
Transmission Type Automatic Automatic
Number of Seats 4 seats 4 seats
Number of Doors 3 doors 2 doors
Vehicle Weight 820 kg 1660 kg
Vehicle Length 4220 mm 4640 mm
Vehicle Width 1700 mm 1750 mm
Vehicle Height 1320 mm 1420 mm
Wheelbase Size 2370 mm 2720 mm
Fuel Tank Capacity 55 L 62 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]