1995 Peugeot 406 vs. 1980 Holden Commodore
To start off, 1995 Peugeot 406 is newer by 15 year(s). Which means there will be less support and parts availability for 1980 Holden Commodore. In addition, the cost of maintenance, including insurance, on 1980 Holden Commodore would be higher. At 2,838 cc (6 cylinders), 1980 Holden Commodore is equipped with a bigger engine. In terms of performance, 1995 Peugeot 406 (108 HP @ 4300 RPM) has 6 more horse power than 1980 Holden Commodore. (102 HP @ 4400 RPM). In normal driving conditions, 1995 Peugeot 406 should accelerate faster than 1980 Holden Commodore. With that said, vehicle weight also plays an important factor in acceleration. 1995 Peugeot 406 weights approximately 270 kg more than 1980 Holden Commodore. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1980 Holden Commodore is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1980 Holden Commodore. However, in wet, icy, snow, or gravel driving conditions, 1995 Peugeot 406, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Peugeot 406 (250 Nm @ 2000 RPM) has 58 more torque (in Nm) than 1980 Holden Commodore. (192 Nm @ 2800 RPM). This means 1995 Peugeot 406 will have an easier job in driving up hills or pulling heavy equipment than 1980 Holden Commodore. 1980 Holden Commodore has automatic transmission and 1995 Peugeot 406 has manual transmission. 1995 Peugeot 406 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1980 Holden Commodore will be easier to drive especially in heavy traffic.
Compare all specifications:
1995 Peugeot 406 | 1980 Holden Commodore | |
Make | Peugeot | Holden |
Model | 406 | Commodore |
Year Released | 1995 | 1980 |
Engine Position | Front | Front |
Engine Size | 2087 cc | 2838 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 108 HP | 102 HP |
Engine RPM | 4300 RPM | 4400 RPM |
Torque | 250 Nm | 192 Nm |
Torque RPM | 2000 RPM | 2800 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | Front | Rear |
Transmission Type | Manual | Automatic |
Vehicle Weight | 1490 kg | 1220 kg |
Vehicle Length | 4560 mm | 4710 mm |
Vehicle Width | 1770 mm | 1730 mm |
Vehicle Height | 1420 mm | 1380 mm |
Wheelbase Size | 2710 mm | 2670 mm |