1996 Audi A3 vs. 2000 Toyota Mark II

To start off, 2000 Toyota Mark II is newer by 4 year(s). Which means there will be less support and parts availability for 1996 Audi A3. In addition, the cost of maintenance, including insurance, on 1996 Audi A3 would be higher. At 1,988 cc (6 cylinders), 2000 Toyota Mark II is equipped with a bigger engine. In terms of performance, 2000 Toyota Mark II (156 HP) has 56 more horse power than 1996 Audi A3. (100 HP) In normal driving conditions, 2000 Toyota Mark II should accelerate faster than 1996 Audi A3. With that said, vehicle weight also plays an important factor in acceleration. 2000 Toyota Mark II weights approximately 276 kg more than 1996 Audi A3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2000 Toyota Mark II is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2000 Toyota Mark II. However, in wet, icy, snow, or gravel driving conditions, 1996 Audi A3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Toyota Mark II (200 Nm) has 64 more torque (in Nm) than 1996 Audi A3. (136 Nm). This means 2000 Toyota Mark II will have an easier job in driving up hills or pulling heavy equipment than 1996 Audi A3. 2000 Toyota Mark II has automatic transmission and 1996 Audi A3 has manual transmission. 1996 Audi A3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Toyota Mark II will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 Audi A3 2000 Toyota Mark II
Make Audi Toyota
Model A3 Mark II
Year Released 1996 2000
Engine Position Front Front
Engine Size 1595 cc 1988 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 100 HP 156 HP
Torque 136 Nm 200 Nm
Engine Bore Size 81 mm 75 mm
Engine Stroke Size 77.5 mm 75 mm
Engine Compression Ratio 10.3:1 10.0:1
Drive Type Front Rear
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Vehicle Weight 1134 kg 1410 kg
Vehicle Length 4160 mm 4780 mm
Vehicle Width 1760 mm 1770 mm
Vehicle Height 1430 mm 1480 mm
Wheelbase Size 2520 mm 2810 mm