1996 Audi A3 vs. 2008 Fiat Siena
To start off, 2008 Fiat Siena is newer by 12 year(s). Which means there will be less support and parts availability for 1996 Audi A3. In addition, the cost of maintenance, including insurance, on 1996 Audi A3 would be higher. At 1,595 cc (4 cylinders), 1996 Audi A3 is equipped with a bigger engine. In terms of performance, both vehicles can yield 100 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1996 Audi A3 weights approximately 60 kg more than 2008 Fiat Siena.
Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Audi A3 (136 Nm) has 62 more torque (in Nm) than 2008 Fiat Siena. (74 Nm). This means 1996 Audi A3 will have an easier job in driving up hills or pulling heavy equipment than 2008 Fiat Siena.
Compare all specifications:
1996 Audi A3 | 2008 Fiat Siena | |
Make | Audi | Fiat |
Model | A3 | Siena |
Year Released | 1996 | 2008 |
Body Type | Hatchback | Sedan |
Engine Position | Front | Front |
Engine Size | 1595 cc | 1581 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 100 HP | 100 HP |
Torque | 136 Nm | 74 Nm |
Engine Bore Size | 81 mm | 86.4 mm |
Engine Stroke Size | 77.5 mm | 67.4 mm |
Engine Compression Ratio | 10.3:1 | 9.5:1 |
Top Speed | 190 km/hour | 184 km/hour |
Drive Type | Front | Front |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 1134 kg | 1074 kg |
Vehicle Length | 4160 mm | 3550 mm |
Vehicle Width | 1760 mm | 1640 mm |
Vehicle Height | 1430 mm | 1440 mm |
Wheelbase Size | 2520 mm | 2380 mm |