1996 Audi RS2 vs. 2008 Hummer H3

To start off, 2008 Hummer H3 is newer by 12 year(s). Which means there will be less support and parts availability for 1996 Audi RS2. In addition, the cost of maintenance, including insurance, on 1996 Audi RS2 would be higher. At 3,653 cc (5 cylinders), 2008 Hummer H3 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Hummer H3 weights approximately 636 kg more than 1996 Audi RS2.

Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Audi RS2 (410 Nm @ 3000 RPM) has 82 more torque (in Nm) than 2008 Hummer H3. (328 Nm @ 4600 RPM). This means 1996 Audi RS2 will have an easier job in driving up hills or pulling heavy equipment than 2008 Hummer H3. 2008 Hummer H3 has automatic transmission and 1996 Audi RS2 has manual transmission. 1996 Audi RS2 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Hummer H3 will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 Audi RS2 2008 Hummer H3
Make Audi Hummer
Model RS2 H3
Year Released 1996 2008
Body Type Station Wagon SUV
Engine Position Front Front
Engine Size 2226 cc 3653 cc
Engine Cylinders 4 cylinders 5 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 311 HP 0 HP
Torque 410 Nm 328 Nm
Torque RPM 3000 RPM 4600 RPM
Fuel Type Gasoline Gasoline
Drive Type 4WD 4WD
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 5 doors 5 doors
Vehicle Weight 1595 kg 2231 kg
Vehicle Length 4520 mm 4750 mm
Vehicle Height 1390 mm 2020 mm
Wheelbase Size 2600 mm 2850 mm