1996 Beijing BJ 2020 vs. 1956 BMW 501
To start off, 1996 Beijing BJ 2020 is newer by 40 year(s). Which means there will be less support and parts availability for 1956 BMW 501. In addition, the cost of maintenance, including insurance, on 1956 BMW 501 would be higher. At 3,166 cc (8 cylinders), 1956 BMW 501 is equipped with a bigger engine. In terms of performance, 1956 BMW 501 (138 HP @ 4800 RPM) has 55 more horse power than 1996 Beijing BJ 2020. (83 HP @ 3800 RPM) In normal driving conditions, 1956 BMW 501 should accelerate faster than 1996 Beijing BJ 2020. With that said, vehicle weight also plays an important factor in acceleration. 1996 Beijing BJ 2020 weights approximately 145 kg more than 1956 BMW 501.
Because 1996 Beijing BJ 2020 is four wheel drive (4WD), it will have significant more traction and grip than 1956 BMW 501. In wet, icy, snow, or gravel driving conditions, 1996 Beijing BJ 2020 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1956 BMW 501 (222 Nm @ 2500 RPM) has 49 more torque (in Nm) than 1996 Beijing BJ 2020. (173 Nm @ 2200 RPM). This means 1956 BMW 501 will have an easier job in driving up hills or pulling heavy equipment than 1996 Beijing BJ 2020.
Compare all specifications:
1996 Beijing BJ 2020 | 1956 BMW 501 | |
Make | Beijing | BMW |
Model | BJ 2020 | 501 |
Year Released | 1996 | 1956 |
Engine Size | 2445 cc | 3166 cc |
Engine Cylinders | 4 cylinders | 8 cylinders |
Engine Type | in-line | in-line |
Horse Power | 83 HP | 138 HP |
Engine RPM | 3800 RPM | 4800 RPM |
Torque | 173 Nm | 222 Nm |
Torque RPM | 2200 RPM | 2500 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | Rear |
Vehicle Weight | 1550 kg | 1405 kg |
Vehicle Length | 3870 mm | 4740 mm |
Vehicle Width | 1760 mm | 1790 mm |
Vehicle Height | 1880 mm | 1540 mm |
Wheelbase Size | 2310 mm | 2840 mm |