1996 BMW 332 vs. 2006 Toyota Camry

To start off, 2006 Toyota Camry is newer by 10 year(s). Which means there will be less support and parts availability for 1996 BMW 332. In addition, the cost of maintenance, including insurance, on 1996 BMW 332 would be higher. At 3,201 cc (6 cylinders), 1996 BMW 332 is equipped with a bigger engine. In terms of performance, 1996 BMW 332 (323 HP @ 7400 RPM) has 173 more horse power than 2006 Toyota Camry. (150 HP @ 5600 RPM). In normal driving conditions, 1996 BMW 332 should accelerate faster than 2006 Toyota Camry. With that said, vehicle weight also plays an important factor in acceleration. 1996 BMW 332 weights approximately 375 kg more than 2006 Toyota Camry. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1996 BMW 332 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 BMW 332. However, in wet, icy, snow, or gravel driving conditions, 2006 Toyota Camry, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 BMW 332 (350 Nm @ 3250 RPM) has 132 more torque (in Nm) than 2006 Toyota Camry. (218 Nm @ 4000 RPM). This means 1996 BMW 332 will have an easier job in driving up hills or pulling heavy equipment than 2006 Toyota Camry. 2006 Toyota Camry has automatic transmission and 1996 BMW 332 has manual transmission. 1996 BMW 332 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Toyota Camry will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 BMW 332 2006 Toyota Camry
Make BMW Toyota
Model 332 Camry
Year Released 1996 2006
Body Type Convertible Sedan
Engine Position Front Front
Engine Size 3201 cc 2362 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 323 HP 150 HP
Engine RPM 7400 RPM 5600 RPM
Torque 350 Nm 218 Nm
Torque RPM 3250 RPM 4000 RPM
Engine Bore Size 86.4 mm 88.5 mm
Engine Stroke Size 91 mm 96 mm
Engine Compression Ratio 11.3:1 9.6:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Vehicle Weight 1560 kg 1185 kg
Vehicle Length 4440 mm 4710 mm
Vehicle Height 1360 mm 1530 mm
Wheelbase Size 2710 mm 2730 mm