1996 BMW 528 vs. 2000 Chrysler Concorde

To start off, 2000 Chrysler Concorde is newer by 4 year(s). Which means there will be less support and parts availability for 1996 BMW 528. In addition, the cost of maintenance, including insurance, on 1996 BMW 528 would be higher. At 2,793 cc (6 cylinders), 1996 BMW 528 is equipped with a bigger engine. In terms of performance, 1996 BMW 528 (201 HP @ 5300 RPM) has 1 more horse power than 2000 Chrysler Concorde. (200 HP @ 5800 RPM). In normal driving conditions, 1996 BMW 528 should accelerate faster than 2000 Chrysler Concorde. With that said, vehicle weight also plays an important factor in acceleration. 1996 BMW 528 weights approximately 120 kg more than 2000 Chrysler Concorde. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1996 BMW 528 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 BMW 528. However, in wet, icy, snow, or gravel driving conditions, 2000 Chrysler Concorde, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 BMW 528 (280 Nm @ 3950 RPM) has 22 more torque (in Nm) than 2000 Chrysler Concorde. (258 Nm @ 4850 RPM). This means 1996 BMW 528 will have an easier job in driving up hills or pulling heavy equipment than 2000 Chrysler Concorde. 2000 Chrysler Concorde has automatic transmission and 1996 BMW 528 has manual transmission. 1996 BMW 528 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Chrysler Concorde will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 BMW 528 2000 Chrysler Concorde
Make BMW Chrysler
Model 528 Concorde
Year Released 1996 2000
Body Type Station Wagon Sedan
Engine Position Front Front
Engine Size 2793 cc 2736 cc
Engine Cylinders 6 cylinders 6 cylinders
Engine Type in-line V
Horse Power 201 HP 200 HP
Engine RPM 5300 RPM 5800 RPM
Torque 280 Nm 258 Nm
Torque RPM 3950 RPM 4850 RPM
Engine Bore Size 84 mm 86 mm
Engine Stroke Size 84 mm 78.5 mm
Engine Compression Ratio 10.2:1 10.0:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 5 doors 4 doors
Vehicle Weight 1695 kg 1575 kg
Vehicle Length 4810 mm 5280 mm
Vehicle Width 1810 mm 1900 mm
Vehicle Height 1450 mm 1420 mm
Wheelbase Size 2840 mm 2880 mm
Fuel Tank Capacity 70 L 68 L