1996 BMW 725 vs. 1953 GAZ M-20
To start off, 1996 BMW 725 is newer by 43 year(s). Which means there will be less support and parts availability for 1953 GAZ M-20. In addition, the cost of maintenance, including insurance, on 1953 GAZ M-20 would be higher. At 2,498 cc (6 cylinders), 1996 BMW 725 is equipped with a bigger engine. In terms of performance, 1996 BMW 725 (141 HP @ 4600 RPM) has 90 more horse power than 1953 GAZ M-20. (51 HP @ 3600 RPM). In normal driving conditions, 1996 BMW 725 should accelerate faster than 1953 GAZ M-20. With that said, vehicle weight also plays an important factor in acceleration. 1996 BMW 725 weights approximately 325 kg more than 1953 GAZ M-20. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 BMW 725 (280 Nm @ 2200 RPM) has 155 more torque (in Nm) than 1953 GAZ M-20. (125 Nm @ 2200 RPM). This means 1996 BMW 725 will have an easier job in driving up hills or pulling heavy equipment than 1953 GAZ M-20.
Compare all specifications:
1996 BMW 725 | 1953 GAZ M-20 | |
Make | BMW | GAZ |
Model | 725 | M-20 |
Year Released | 1996 | 1953 |
Engine Size | 2498 cc | 2119 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 141 HP | 51 HP |
Engine RPM | 4600 RPM | 3600 RPM |
Torque | 280 Nm | 125 Nm |
Torque RPM | 2200 RPM | 2200 RPM |
Fuel Type | Diesel | Gasoline |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1785 kg | 1460 kg |
Vehicle Length | 5130 mm | 4670 mm |
Vehicle Width | 1870 mm | 1900 mm |
Vehicle Height | 1430 mm | 1650 mm |
Wheelbase Size | 2940 mm | 2710 mm |