1996 BMW 725 vs. 2006 Isuzu I-280

To start off, 2006 Isuzu I-280 is newer by 10 year(s). Which means there will be less support and parts availability for 1996 BMW 725. In addition, the cost of maintenance, including insurance, on 1996 BMW 725 would be higher. At 2,801 cc, 2006 Isuzu I-280 is equipped with a bigger engine. In terms of performance, 2006 Isuzu I-280 (175 HP @ 5600 RPM) has 34 more horse power than 1996 BMW 725. (141 HP @ 4600 RPM) In normal driving conditions, 2006 Isuzu I-280 should accelerate faster than 1996 BMW 725. With that said, vehicle weight also plays an important factor in acceleration. 2006 Isuzu I-280 weights approximately 225 kg more than 1996 BMW 725. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 BMW 725 (280 Nm @ 2200 RPM) has 29 more torque (in Nm) than 2006 Isuzu I-280. (251 Nm @ 2800 RPM). This means 1996 BMW 725 will have an easier job in driving up hills or pulling heavy equipment than 2006 Isuzu I-280.

Compare all specifications:

1996 BMW 725 2006 Isuzu I-280
Make BMW Isuzu
Model 725 I-280
Year Released 1996 2006
Engine Position Front Front
Engine Size 2498 cc 2801 cc
Horse Power 141 HP 175 HP
Engine RPM 4600 RPM 5600 RPM
Torque 280 Nm 251 Nm
Torque RPM 2200 RPM 2800 RPM
Engine Compression Ratio 22.0:1 10.0:1
Drive Type Rear Rear
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1785 kg 2010 kg
Vehicle Length 5130 mm 5270 mm
Vehicle Width 1870 mm 1720 mm
Vehicle Height 1430 mm 1700 mm
Wheelbase Size 2940 mm 3200 mm