1996 BMW 725 vs. 2009 Hyundai i20

To start off, 2009 Hyundai i20 is newer by 13 year(s). Which means there will be less support and parts availability for 1996 BMW 725. In addition, the cost of maintenance, including insurance, on 1996 BMW 725 would be higher. At 2,498 cc (6 cylinders), 1996 BMW 725 is equipped with a bigger engine. In terms of performance, 1996 BMW 725 (141 HP @ 4600 RPM) has 42 more horse power than 2009 Hyundai i20. (99 HP @ 5500 RPM). In normal driving conditions, 1996 BMW 725 should accelerate faster than 2009 Hyundai i20. With that said, vehicle weight also plays an important factor in acceleration. 1996 BMW 725 weights approximately 630 kg more than 2009 Hyundai i20. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1996 BMW 725 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 BMW 725. However, in wet, icy, snow, or gravel driving conditions, 2009 Hyundai i20, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 BMW 725 (280 Nm @ 2200 RPM) has 143 more torque (in Nm) than 2009 Hyundai i20. (137 Nm @ 4200 RPM). This means 1996 BMW 725 will have an easier job in driving up hills or pulling heavy equipment than 2009 Hyundai i20. 2009 Hyundai i20 has automatic transmission and 1996 BMW 725 has manual transmission. 1996 BMW 725 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2009 Hyundai i20 will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 BMW 725 2009 Hyundai i20
Make BMW Hyundai
Model 725 i20
Year Released 1996 2009
Body Type Sedan Hatchback
Engine Position Front Front
Engine Size 2498 cc 1396 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 141 HP 99 HP
Engine RPM 4600 RPM 5500 RPM
Torque 280 Nm 137 Nm
Torque RPM 2200 RPM 4200 RPM
Engine Bore Size 80.1 mm 77 mm
Engine Stroke Size 83 mm 75 mm
Engine Compression Ratio 22.0:1 17:01
Fuel Type Diesel Gasoline
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1785 kg 1155 kg
Vehicle Length 5130 mm 3940 mm
Vehicle Width 1870 mm 1710 mm
Vehicle Height 1430 mm 1490 mm
Wheelbase Size 2940 mm 2525 mm