1996 BMW 840 vs. 2003 Chrysler Sebring

To start off, 2003 Chrysler Sebring is newer by 7 year(s). Which means there will be less support and parts availability for 1996 BMW 840. In addition, the cost of maintenance, including insurance, on 1996 BMW 840 would be higher. At 4,398 cc (8 cylinders), 1996 BMW 840 is equipped with a bigger engine. In terms of performance, 1996 BMW 840 (282 HP @ 5700 RPM) has 136 more horse power than 2003 Chrysler Sebring. (146 HP @ 5700 RPM). In normal driving conditions, 1996 BMW 840 should accelerate faster than 2003 Chrysler Sebring. With that said, vehicle weight also plays an important factor in acceleration. 1996 BMW 840 weights approximately 360 kg more than 2003 Chrysler Sebring. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1996 BMW 840 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 BMW 840. However, in wet, icy, snow, or gravel driving conditions, 2003 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 BMW 840 (440 Nm @ 3900 RPM) has 252 more torque (in Nm) than 2003 Chrysler Sebring. (188 Nm @ 4350 RPM). This means 1996 BMW 840 will have an easier job in driving up hills or pulling heavy equipment than 2003 Chrysler Sebring. 1996 BMW 840 has automatic transmission and 2003 Chrysler Sebring has manual transmission. 2003 Chrysler Sebring will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 BMW 840 will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 BMW 840 2003 Chrysler Sebring
Make BMW Chrysler
Model 840 Sebring
Year Released 1996 2003
Body Type Coupe Convertible
Engine Position Front Front
Engine Size 4398 cc 1996 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Horse Power 282 HP 146 HP
Engine RPM 5700 RPM 5700 RPM
Torque 440 Nm 188 Nm
Torque RPM 3900 RPM 4350 RPM
Engine Bore Size 92 mm 87.5 mm
Engine Stroke Size 82.7 mm 83 mm
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 4 seats 4 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1890 kg 1530 kg
Vehicle Length 4790 mm 4930 mm
Vehicle Width 1860 mm 1800 mm
Vehicle Height 1350 mm 1410 mm
Wheelbase Size 2690 mm 2700 mm
Fuel Tank Capacity 90 L 61 L