1996 BMW M3 vs. 1973 Holden UTE

To start off, 1996 BMW M3 is newer by 23 year(s). Which means there will be less support and parts availability for 1973 Holden UTE. In addition, the cost of maintenance, including insurance, on 1973 Holden UTE would be higher. At 5,047 cc (8 cylinders), 1973 Holden UTE is equipped with a bigger engine. In terms of performance, 1996 BMW M3 (326 HP @ 4800 RPM) has 86 more horse power than 1973 Holden UTE. (240 HP @ 4800 RPM). In normal driving conditions, 1996 BMW M3 should accelerate faster than 1973 Holden UTE.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1973 Holden UTE (427 Nm) has 122 more torque (in Nm) than 1996 BMW M3. (305 Nm). This means 1973 Holden UTE will have an easier job in driving up hills or pulling heavy equipment than 1996 BMW M3. 1973 Holden UTE has automatic transmission and 1996 BMW M3 has manual transmission. 1996 BMW M3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1973 Holden UTE will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 BMW M3 1973 Holden UTE
Make BMW Holden
Model M3 UTE
Year Released 1996 1973
Engine Position Front Front
Engine Size 3001 cc 5047 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 2 valves
Horse Power 326 HP 240 HP
Engine RPM 4800 RPM 4800 RPM
Torque 305 Nm 427 Nm
Engine Bore Size 86.2 mm 101.6 mm
Engine Stroke Size 85.9 mm 77.8 mm
Engine Compression Ratio 10.5:1 9.0:1
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 4 seats 3 seats
Vehicle Length 4440 mm 4890 mm
Vehicle Width 1720 mm 1880 mm
Vehicle Height 1370 mm 1390 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]