1996 BMW M3 vs. 2008 Ford Bantam

To start off, 2008 Ford Bantam is newer by 12 year(s). Which means there will be less support and parts availability for 1996 BMW M3. In addition, the cost of maintenance, including insurance, on 1996 BMW M3 would be higher. At 3,169 cc (6 cylinders), 1996 BMW M3 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1996 BMW M3 weights approximately 672 kg more than 2008 Ford Bantam.

Because 1996 BMW M3 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 BMW M3. However, in wet, icy, snow, or gravel driving conditions, 2008 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 BMW M3 (350 Nm @ 3250 RPM) has 240 more torque (in Nm) than 2008 Ford Bantam. (110 Nm @ 3000 RPM). This means 1996 BMW M3 will have an easier job in driving up hills or pulling heavy equipment than 2008 Ford Bantam.

Compare all specifications:

1996 BMW M3 2008 Ford Bantam
Make BMW Ford
Model M3 Bantam
Year Released 1996 2008
Body Type Convertible Pickup
Engine Position Front Front
Engine Size 3169 cc 1297 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 328 HP 0 HP
Torque 350 Nm 110 Nm
Torque RPM 3250 RPM 3000 RPM
Engine Bore Size 86.4 mm 74 mm
Engine Stroke Size 91 mm 75.5 mm
Engine Compression Ratio 11.3:1 10.2:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Number of Seats 5 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1632 kg 960 kg
Vehicle Length 4440 mm 4280 mm
Vehicle Width 1790 mm 1470 mm
Vehicle Height 1340 mm 1640 mm
Wheelbase Size 2720 mm 2670 mm
Fuel Tank Capacity 63 L 54 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]