1996 BMW M3 vs. 2010 Rolls-Royce Phantom Drophead Coupe

To start off, 2010 Rolls-Royce Phantom Drophead Coupe is newer by 14 year(s). Which means there will be less support and parts availability for 1996 BMW M3. In addition, the cost of maintenance, including insurance, on 1996 BMW M3 would be higher. At 6,700 cc (12 cylinders), 2010 Rolls-Royce Phantom Drophead Coupe is equipped with a bigger engine. In terms of performance, 2010 Rolls-Royce Phantom Drophead Coupe (453 HP @ 5350 RPM) has 127 more horse power than 1996 BMW M3. (326 HP @ 4800 RPM) In normal driving conditions, 2010 Rolls-Royce Phantom Drophead Coupe should accelerate faster than 1996 BMW M3. With that said, vehicle weight also plays an important factor in acceleration. 2010 Rolls-Royce Phantom Drophead Coupe weights approximately 1082 kg more than 1996 BMW M3. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Rolls-Royce Phantom Drophead Coupe (719 Nm) has 414 more torque (in Nm) than 1996 BMW M3. (305 Nm). This means 2010 Rolls-Royce Phantom Drophead Coupe will have an easier job in driving up hills or pulling heavy equipment than 1996 BMW M3. 2010 Rolls-Royce Phantom Drophead Coupe has automatic transmission and 1996 BMW M3 has manual transmission. 1996 BMW M3 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Rolls-Royce Phantom Drophead Coupe will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 BMW M3 2010 Rolls-Royce Phantom Drophead Coupe
Make BMW Rolls-Royce
Model M3 Phantom Drophead Coupe
Year Released 1996 2010
Engine Position Front Front
Engine Size 3001 cc 6700 cc
Engine Cylinders 6 cylinders 12 cylinders
Engine Type in-line V
Valves per Cylinder 4 valves 4 valves
Horse Power 326 HP 453 HP
Engine RPM 4800 RPM 5350 RPM
Torque 305 Nm 719 Nm
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 4 seats 4 seats
Vehicle Weight 1588 kg 2670 kg
Vehicle Length 4440 mm 5608 mm
Vehicle Width 1720 mm 1986 mm
Vehicle Height 1370 mm 1580 mm
Wheelbase Size 2730 mm 3320 mm