1996 Cadillac Catera vs. 2007 Ford Bantam

To start off, 2007 Ford Bantam is newer by 11 year(s). Which means there will be less support and parts availability for 1996 Cadillac Catera. In addition, the cost of maintenance, including insurance, on 1996 Cadillac Catera would be higher. At 2,962 cc (6 cylinders), 1996 Cadillac Catera is equipped with a bigger engine. In terms of performance, 1996 Cadillac Catera (200 HP) has 126 more horse power than 2007 Ford Bantam. (74 HP). In normal driving conditions, 1996 Cadillac Catera should accelerate faster than 2007 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 1996 Cadillac Catera weights approximately 696 kg more than 2007 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1996 Cadillac Catera is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1996 Cadillac Catera. However, in wet, icy, snow, or gravel driving conditions, 2007 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Cadillac Catera (260 Nm @ 3600 RPM) has 150 more torque (in Nm) than 2007 Ford Bantam. (110 Nm @ 2500 RPM). This means 1996 Cadillac Catera will have an easier job in driving up hills or pulling heavy equipment than 2007 Ford Bantam. 1996 Cadillac Catera has automatic transmission and 2007 Ford Bantam has manual transmission. 2007 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Cadillac Catera will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 Cadillac Catera 2007 Ford Bantam
Make Cadillac Ford
Model Catera Bantam
Year Released 1996 2007
Body Type Sedan Pickup
Engine Position Front Front
Engine Size 2962 cc 1296 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 200 HP 74 HP
Torque 260 Nm 110 Nm
Torque RPM 3600 RPM 2500 RPM
Engine Bore Size 86 mm 74 mm
Engine Stroke Size 85 mm 75.5 mm
Engine Compression Ratio 10.0:1 10.2:1
Fuel Type Gasoline Gasoline
Top Speed 204 km/hour 158 km/hour
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1710 kg 1014 kg
Vehicle Length 4930 mm 4280 mm
Vehicle Width 1790 mm 1640 mm
Vehicle Height 1460 mm 1470 mm
Wheelbase Size 2940 mm 2670 mm
Fuel Consumption Overall 13.9 L/100km 8.8 L/100km
Fuel Tank Capacity 68 L 54 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]