1996 Chrysler Cirrus vs. 1950 Holden FX
To start off, 1996 Chrysler Cirrus is newer by 46 year(s). Which means there will be less support and parts availability for 1950 Holden FX. In addition, the cost of maintenance, including insurance, on 1950 Holden FX would be higher. At 2,497 cc (6 cylinders), 1996 Chrysler Cirrus is equipped with a bigger engine. In terms of performance, 1996 Chrysler Cirrus (168 HP) has 117 more horse power than 1950 Holden FX. (51 HP). In normal driving conditions, 1996 Chrysler Cirrus should accelerate faster than 1950 Holden FX. With that said, vehicle weight also plays an important factor in acceleration. 1996 Chrysler Cirrus weights approximately 464 kg more than 1950 Holden FX. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1950 Holden FX is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1950 Holden FX. However, in wet, icy, snow, or gravel driving conditions, 1996 Chrysler Cirrus, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Chrysler Cirrus (230 Nm @ 4350 RPM) has 94 more torque (in Nm) than 1950 Holden FX. (136 Nm @ 2000 RPM). This means 1996 Chrysler Cirrus will have an easier job in driving up hills or pulling heavy equipment than 1950 Holden FX. 1996 Chrysler Cirrus has automatic transmission and 1950 Holden FX has manual transmission. 1950 Holden FX will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Chrysler Cirrus will be easier to drive especially in heavy traffic.
Compare all specifications:
1996 Chrysler Cirrus | 1950 Holden FX | |
Make | Chrysler | Holden |
Model | Cirrus | FX |
Year Released | 1996 | 1950 |
Engine Position | Front | Front |
Engine Size | 2497 cc | 2165 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 168 HP | 51 HP |
Torque | 230 Nm | 136 Nm |
Torque RPM | 4350 RPM | 2000 RPM |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Vehicle Weight | 1434 kg | 970 kg |
Vehicle Length | 4730 mm | 4380 mm |
Vehicle Width | 1830 mm | 1710 mm |
Vehicle Height | 1340 mm | 1580 mm |
Wheelbase Size | 2750 mm | 2620 mm |