1996 Chrysler Cirrus vs. 1953 Ford Consul

To start off, 1996 Chrysler Cirrus is newer by 43 year(s). Which means there will be less support and parts availability for 1953 Ford Consul. In addition, the cost of maintenance, including insurance, on 1953 Ford Consul would be higher. At 2,497 cc (6 cylinders), 1996 Chrysler Cirrus is equipped with a bigger engine. In terms of performance, 1996 Chrysler Cirrus (168 HP) has 128 more horse power than 1953 Ford Consul. (40 HP). In normal driving conditions, 1996 Chrysler Cirrus should accelerate faster than 1953 Ford Consul. With that said, vehicle weight also plays an important factor in acceleration. 1996 Chrysler Cirrus weights approximately 384 kg more than 1953 Ford Consul. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1953 Ford Consul is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1953 Ford Consul. However, in wet, icy, snow, or gravel driving conditions, 1996 Chrysler Cirrus, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Chrysler Cirrus (230 Nm @ 4350 RPM) has 130 more torque (in Nm) than 1953 Ford Consul. (100 Nm @ 2400 RPM). This means 1996 Chrysler Cirrus will have an easier job in driving up hills or pulling heavy equipment than 1953 Ford Consul. 1996 Chrysler Cirrus has automatic transmission and 1953 Ford Consul has manual transmission. 1953 Ford Consul will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Chrysler Cirrus will be easier to drive especially in heavy traffic.

Compare all specifications:

1996 Chrysler Cirrus 1953 Ford Consul
Make Chrysler Ford
Model Cirrus Consul
Year Released 1996 1953
Engine Position Front Front
Engine Size 2497 cc 1508 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 168 HP 40 HP
Torque 230 Nm 100 Nm
Torque RPM 4350 RPM 2400 RPM
Drive Type Front Rear
Transmission Type Automatic Manual
Number of Seats 5 seats 5 seats
Vehicle Weight 1434 kg 1050 kg
Vehicle Length 4730 mm 4280 mm
Vehicle Width 1830 mm 1630 mm
Vehicle Height 1340 mm 1550 mm
Wheelbase Size 2750 mm 2550 mm